We supply / manufacture a range of high quality replacement parts for kodiak, Hamilton 770 / 750 and 212 series. This includes in house made high performance stainless impellers. We typically have all below items in stock at our Canadian warehouse.
**Prices exclude applicable tax.**
Contact our sales team if you have questions or to place an order.
236-999-9154 Sales@southernjet.ca
** Prices may change without notice to stay up to date with our current costs, Below is attempted to stay as accurate and up to date as possible. **
| HAMILTON 212 REBUILD PARTS: | ||||
| H212-BE | MAIN BEARING FOR 212 HAMILTON | $346.68 | ||
| H770-CP | 1/2” S/S COTTER PIN | $41.50 | ||
| H212-BH | 212 BEARING HOUSING | $485.00 | ||
| H212-CB | 212 CUTLESS BEARING | $386.50 | ||
| H212-CC-EA | 212 CLOSE COUPLE ENGINE ADAPTOR | |||
| H212-CCKIT | 212 CLOSE COUPLING KIT | |||
| H212-CS | CHROME SLEEVE S/S 212 | $236.50 | ||
| H212-CSB | 212 BEARING CHROME SLEEVE | 2 required, one each side of bearing. | $249.5 | |
| H212-G | GRILL, 212 H/T BARS | $620.00 | ||
| H212-IC | HAMILTON 212 INSPCTION COVER | $155.00 | ||
| H212-K | 212 KEY FOR MAIN SHAFT | $39.50 | ||
| H212-MS | 212 MAIN SHAFT | $1,390.00 | ||
| H212-MSNUT | MAIN SHAFT NUT HAMILTON 3/4 | $69.50 | ||
| H212-MSNBE | HAMILTION 212 MAIN SHAFT NUT FOR BEARING END | $129.50 | ||
| H212-MSNBE-GS | GRUB SCREW FOR BEARING NUT | $1.99 | ||
| H212-MSSP | SPLIT PIN, HOLDS MACH SEAL | $7.48 | ||
| H212-NH | 212 NOZZLE HOLDER | $389.00 | ||
| H212-NI | NOZZLE (MALE ALLOY SECTION) | $389.00 | ||
| H212-ORBR | ORING BEARING HOUSING 212 | $5.75 | ||
| H212-ORRL | 212 REVERSE LINK O-RING | $5.50 | ||
| H212-ORIC | O RING FOR 750/770 INSPECTION CAP | $8.95 | ||
| H212-ORS | O RING STATOR HOUSING 212 | $15.75 | ||
| H212-ORSH | ORING, SEAL CARRIER 212 HAMILTON | $6.75 | ||
| H212-ORT | 212 TRANSOM O-RING | $59.25 | ||
| H212-RB | 212 REVERSE BUCKET | $1,175.00 | ||
| H212-RBBO | REVERSE BUCKET BOLT. 16X 50 | $9.15 | ||
| H212-RBBS | 212 REVERSE BUCKET S/S BUSHING | TWO REQUIRED. | $26.66 | |
| H212-RBB | REV BUCKET BUSH 212 | BRASS | $25.50 | |
| H212-RBLA | F/R LINKAGE ARM | $199.00 | ||
| H212-REVLAB | F/R LINK S/S BALL | $53.49 | ||
| H212-RBLBOLT | REVERSE LINKAGE BOLT. | $7.55 | ||
| H212-SB | 212 BRONZE STEERING BUSH | $31.25 | ||
| H212-SEIO | SEAL, MAIN BEARING HOUSING 212 | REQUIRES TWO. | $38.75 | |
| H212-SEM | CARBIN SEAL 1.5MECHANICAL SEAL | REQUIRES TWO. | $159.50 | |
| H212-SH | 212 SEAL HOLDER | $368.95 | ||
| H212-SK | STEERING KNUCKLE 212 | $187.50 | ||
| H212-TR | TRANSOM RING 212 | $550.00 | ||
| H212-TRG | 212 TRANSOM RING GASKET | $58.95 | ||
| H212-W12 | 212 WEDGE 12 MM | Tilts nozzle OEM down. | $139.50 | |
| H212-W16 | 212 WEDGE 16MM | Tilts nozzle OEM down. | $149.50 | |
| H212-WR | H212/213 WEAR RING | $339.50 | ||
| H212-WRI | H212 WEAR RING INSULATOR | $139.95 | ||
| HAMILTON 750 REBUILD PARTS: | ||||
| H750-DF | FLANGE, FRONT DRIVE 750 | $188.95 | ||
| H750-DFKEY | KEY, 750 DRIVE FLANGE | $14.75 | ||
| H750-MS2 | MAIN SHAFT 752 HAMILTON S/S | $779.00 | ||
| H750-MS3 | MAIN SHAFT 753 HAMILTON S/S | $797.00 | ||
| H750-N | 750 FEMALE NOZZLE SECTION | $323.00 | ||
| H750-NA | NOZZLE ASSEMBLY 750 STANDARD | $713.00 | ||
| H750-NB | 750 NOZZLE BUSH | $17.95 | ||
| H750-NH | 750 NOZZLE HOLDER | $465.00 | ||
| H750-NP | 750 NOZZLE PIN | $49.75 | ||
| H750-RB178D | DUCTED REVERSE BUCKET 750 | Works with OEM nozzle or our possi nozzle. | $757.00 | |
| H750-RB178D | DUCTED REVERSE BUCKET 750 | Works with OEM nozzle or our trim nozzle. | $757.00 | |
| H750-RBB | REV BUCKET PIVOT BUSH 750 | $34.95 | ||
| H750-RBCAMB | REV BUCKET CAM BUSH 750 | $35.50 | ||
| H750-RK | 750 F/R KNUCKLE BRONZE | $129.50 | ||
| H750-SEI | 750 INNER SEAL | $22.95 | ||
| H750-SEO | 750 OUTER SEAL | $23.95 | ||
| H750-SK | 750 STEERING KNUCKLES BRONZE | $147.50 | ||
| H750-SKL | 750 STEERING LINKAGE BRONZE | $69.50 | ||
| H750-SKLB | 750 STEERING LINKAGE BUSH S/S | $35.95 | ||
| H750-SKLBOLT | BOLT 750 STEERING LINKAGE | $4.95 | ||
| H750-SS2C-TN | 752 STEERING SHAFT FOR TRIM | $168.50 | ||
| MORE 750 PARTS BELOW, CROSS WITH 770. | ||||
| HAMILTON 770 / 750 REBUILD PARTS: | ||||
| H770-BE | MAIN BEARING 307 S.K.F | $237.50 | ||
| H770-BH | BEARING HOUSING 770/750 ALLOY | $377.00 | ||
| H770-BI | BEARING INSULATOR 750/770 | $13.95 | ||
| H770-CB | CUTLESS BEARING 1.500 770/750 | $139.50 | ||
| H770-CS | 750/770 BRASS CHROME SLEEVE | $97.50 | ||
| H770-CSBL | SLEEVE 770 LOCATES BEARING | $52.95 | ||
| H770-CSS | 750/770 S/S CHROME SLEEVE | $119.50 | ||
| H770-CP | COTTER PIN LARGE 1/2 FITS HAMILTON STEERING AND REVERSE LINKAGES | $39.50 | ||
| H770-DF1310 | 770 SPLINE DRIVE FLANGE 1310 | $193.50 | ||
| H770-DF1410 | 770 SPLINE DRIVE FLANGE 1410 | $323.50 | ||
| H770-G | GRILL FITS 770/750 HAMILTON,HT | $629.00 | ||
| H770-GB | GRILL BARS H/T 20 x 6 | $39.90 | ||
| H770-GBK | GRILL BOLT KIT | $49.75 | ||
| H770-HS | ISPECTION HATCH STUD | $7.95 | ||
| H770-IG | INTAKE BASE GASKET 750/770 | $83.50 | ||
| H770-IH | 770 INTAKE HOUSING ONLY | $2,535 | ||
| H770-KEY | KEY FOR 750/ 770, FOR BLADES | $17.25 | ||
| H770-LR | ALLOY LOCATING RING 770 | $192.50 | ||
| H770-MS2 | MAIN SHAFT 772 HAMILTON S/S | $828.50 | ||
| H770-MS3 | MAIN SHARFT 773 HAMILTON S/S | $875.00 | ||
| H770-MSNB | BRASS MAIN SHAFT NUT 3/4 UNF | $48.25 | ||
| H770-MSNBE | BEARING HOUSING NUT | $65.25 | ||
| H770-MSNN | MAIN SHAFT NYLOCK NUT 3/4 UNF | $24.25 | ||
| H770-MSNUT | NUT 3/4 UNF MAIN SHAFT S/S | $22.50 | ||
| H770-MSS2 | SPACER 1 1/2X 2MM FOR MAINSH | $14.25 | ||
| H770-MSS3 | SPACER 1 1/2X3MM FOR MAINSHAFT | $14.95 | ||
| H770-MSS4 | SPACER 1 1/2 X 4MM FOR MAIN | $17.25 | ||
| H770-MSS5 | SPACER 11/2X5MM FOR MAIN SHAFT | $17.95 | ||
| H770-MSSP | SPLIT PIN 770/750 | $5.95 | ||
| H770-MSW | MAIN SHAFT WASHER | $17.95 | ||
| H770-N | 770 FEMAIL NOZZLE SECTION | $323.50 | ||
| H770-NA | NOZZLE ASSEMBLY 770 STANDARD | $789.00 | ||
| H770-NAL | LARGE NOZZLE ASSEMBLE | $798.00 | ||
| H770-NBBUSH | 770 NOZZLE BOTTOM BUSH | $24.95 | ||
| H770-NBPIN | 770 NOZZLE BOTTOM PIN | $124.95 | ||
| H770-NH | 770 NOZZLE HOLDER | $349.00 | ||
| H770-NI | SJ REPLACEMENT NOZZLE INSERTS | $139.50 | ||
| H770-NI-L | LARGE NOZZLE INSERTS | $149.50 | ||
| H770-NI-S | SMALL NOZZLE INSERT | $113.50 | ||
| H770-NL-SB | STEERING BRACKET LARGE NOZZLE | $215.50 | ||
| H770-NL-SBP | S/S PROFILE (STEERING BRACKET) | $48.50 | ||
| H770-NPBOLT | 770 NOZZLE BOTTOM PIN BOLT | $4.25 | ||
| H770-N-SB | STEERING BRACKET STD NOZZLE | $215.50 | ||
| H770-N-SBP | S/S PROFILE (STEERING BRACKET) | $48.50 | ||
| H770-NTBUSH | 770 NOZZLE TOP BUSH | $43.55 | ||
| H770-NTPIN | 770 NOZZLE TOP PIN | $43.55 | ||
| H770-ORBR | ORING FOR 770/750 ALLOY BEARING RETAINER. | $3.75 | ||
| H770-ORIC | ORING 770 INSPECTION CAP | $6.55 | ||
| H770-ORS | O RING STATOR HOUSING 770/750 HAMILTON | $6.95 | ||
| H770-ORSH | ORING ON MECHANCIAL SEAL HOLDER FOR 770/750 | $4.45 | ||
| H770-ORSS | O RING STEERING, F/R,SHAFTS | $4.25 | ||
| H770-ORWT | O RING WATER TUBE 770/750 | $4.15 | ||
| H770-RB178D | REVERSE BUCKET,770, SMALL DUCT | Works with oem nozzle or our small trim nozzle | $1295.00 | |
| H770-RBBOLT | REV BUCKET BOLT S/S | $19.75 | ||
| H770-RBBS | F/R BRAKE SPRING | Fits most jet units. | $28.55 | |
| H770-RBCAMB | REV BUCKET CAM BUSH 770 | $35.00 | ||
| H770-RBCAMBOLT | BUCKET CAM BOLT | $5.95 | ||
| H770-RBFW | REV BUCKET WASHER S/S | $4.95 | ||
| H770-RBLBR | REV LINKAGE BRACKET | $231.00 | ||
| H770-RBPB | REV BUCKET PIVOT BUSH 770 | $32.50 | ||
| H770-RBS | REV BUCKET SPRING S/S | Fits most jet units. | $28.55 | |
| H770-RK | 770 F/R KNUCKLE BRONZE | $128.80 | ||
| H770-RLPB | F/R LINKAGE PIN BUSH | $27.95 | ||
| H770-RS2 | F/R SHAFT ONLY,2 STAGE, S/S. | $97.00 | ||
| H770-RS3 | F/R SHAFT ONLY,3 STAGE, S/S | $112.00 | ||
| H770-RSC2 | F/R SHAFT, 2 STAGE,COMPLETE | $199.90 | ||
| H770-RSC3 | F/R SHAFT,3 STAGE, COMPLETE | $205.50 | ||
| H770-SEIO | HAMILTON 770 INNER AND OUTTER SEAL (BOTH THE SAME SIZE) | $19.95 | ||
| H770-SB | HAMILTON 770/750 NYLON BUSH FOR STEERING AND F/R SHAFTS, THROUGH TRANSOM & TAILPIPE | $9.55 | ||
| H770-SEM | MECHANICAL SEAL 1.5 RUBBER BAL | $123.25 | ||
| H770-SH | MECHANICALSEALHOLDER, NYLON, SUITS 770/750 | $74.25 | ||
| H770-SHA | ADAPTOR SMALL SHAFT COLORADO | $74.00 | ||
| H770-SK | 770 STEERING KNUCKLE BRONZE | $165.50 | ||
| H770-SL | SLINGER, RUBBER DICE | $9.95 | ||
| H770-ST | STATOR HOUSING ONLY | $338.50 | ||
| H770-STB | NYLON BUSH,STEERING,F/R, SHAFT | $338.50 | ||
| H770-STH | COMPL STATOR STEEL INSERT | $1180.00 | ||
| H770-STI | STEEL STATOR INSERT ONLY | $380.00 | ||
| H770-STI-SS | S/S STATOR INSERT ONLY | $630.75 | ||
| H770-TG | TRANSOM SEAL 750/770 | $145.50 | ||
| H770-TGS | TRANSOM SEAL SPRING 770 | $35.50 | ||
| $285.95 | ||||
| H770-TNPIN | 770/750 TOP/BOTTOM PIN | $65.25 | ||
| H770-TNR | TILT RING 770/750 | $385.00 | ||
| H770-TNSPL | LARGE TILT SIDE PLATE AB | $385.00 | ||
| H770-TNSPS | TILT SIDE PLATE (SMALL) AB | $228.95 | ||
| H770-TP | TAIL PIPE 770 | $920.00 | ||
| H770-TPN | TAIL PIPE STUD NUT | |||
| H770-TR | 770 TRANSOM RING (HOLDS GASKET TO BACK OF BOAT) | $387.50 | ||
| H770-TRBK | HAMILTON 770 TRANSOM RING BUSH (kit 12) | $47.75 | ||
| H770-TRI | TRANSOM INNER RING | $499.50 | ||
| H770-W | WEDGES 770 ROUND TYPE-PAIR | $115.50 | ||
| H770-WR | WEAR RING 7.5 HAMILTON | $79.95 | ||
| H770-WRI | WEAR RING INSULATOR 7.5 HAMILTON | $54.95 | ||
| H770-WT2 | 770/750 WATER TUBE 2 STAGE | $55.80 | ||
| H770-WT3 | 770/750 WATER TUBE 3 STAGE | $59.90 |
** Prices may change without notice to stay up to date with the current costs, Above is attempted to stay as accurate and up to date as possible.
Southern Jet 